Connecting the breakout box
Special tools:
- Ignition off
- Remove fuses 11C/21, 11C/25 and 11C/32 from the fusebox in the passenger compartment
- Expose the central electronic module (CEM). See Central electronic module (CEM), replacing .
Connect adapter 9511503 to the control module connector. Connect breakout box 9511428 to the adapter.
Disconnect the breakout box in reverse order.
NOTE:
Before the control module can be checked and measurements taken, the removed fuses must first be installed.
For further information about signals and other values:
- -2004: see Signal specification
- 2005-: see Signal specification