Checking the cable for a short-circuit to ground
Remove windshield wiper relay 2/91 from the fusebox base.
Check the cable between relay base terminal #2 and ground. Check for a short-circuit to ground.
Remedy as necessary.
Replace the fusebox if no fault is found.
Other information:
- To access or replace the fusebox, see Integrated relay/fusebox, engine compartment, replacing
- To connect the breakout box, see Connecting the breakout box
- -2004: Signal specification
- 2005-: Signal specification
- See Checking wiring and terminals .
- Continue
Refer to Verification