Checking components and wiring
Check the cable between the central electronic module terminal #D11 and the left lamp housing terminal #5A (10/2). Check for a short-circuit to ground.
Replace the right lamp housing if no fault is found.
Other information:
- To connect the breakout box, see Connecting the breakout box
- To access or replace the lamp housing:
- For -2004, see: Headlamp/bulb, replacing
- For 2005-, see: Headlamp/bulb, replacing .
- -2004: Signal specification
- 2005-: Signal specification
- See Checking wiring and terminals .
- Continue
Refer to Verification