Checking component and contacts

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Remove switch 6/38 for LH and 6/39 for RH actuator.

  Check connector for oxidation as described in Contact resistance and oxidation .

  Also check connectors 54/4 and 54/3LG.

  Do the necessary corrective action.

  Fig 2: Identifying Connector Terminals

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 3: Identifying Ohm Meter

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 4: Identifying Connector Terminals

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is there a fault? 

• YES 

  Refer to Verification 

• NO 

  Refer to Checking the wiring