Checking the wires
Check the wire between central electronic module (CEM) connector 20A and ignition lock connector 50 for an intermittent open circuit as described in Open-circuit, intermittent faults , and for a short circuit to ground as described in Short-circuit to ground, intermittent faults .
Additional information
- The voltage should be the same as the battery voltage with the key in position III.
- To access/replace the CEM connector, see Central electronic module (CEM), replacing
- To connect a test box, see Connecting the breakout box
- For further information about signals and other values:
- -2004: Signal specification
- 2005-: Signal specification