Checking for contact resistance and oxidation
Check CD-ROM player connector K and road traffic information module (RTI) connector A. Check for contact resistance and oxidation. Remedy if necessary. See Contact resistance and oxidation .
Check the wiring between road traffic information module (RTI) terminals #A7, #A19 and #A20 and the CD-ROM player terminals #K3, #K4 and #K5. Check for an open-circuit. See Open-circuit, permanent faults . Check for a short-circuit to ground. See Short-circuit to ground, permanent faults .
Remedy as necessary.
Other information:
- To access or replace the road traffic information module (RTI), see Removal
- To access and replace the CD-ROM player, see CD reader, RTI (road traffic information), replacing
- To connect the breakout box, see Connecting the breakout box to the Road Traffic Information (RTI) control module
- For information about signals and connectors, see RTI control module and CD-ROM changer (to RTI control module and "chassis") .
Is the CD-ROM player OK?
- YES
Refer to Verification
- NO
Refer to Replacing CD-ROM player