LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Drive Shaft, CV Joint (Ambulance; 2003-2004) >> Boot, half shaft, replacing >> Disassembly >> Replacing the inner boot: Remove the clamps from the inner boot

Replacing the inner boot: Remove the clamps from the inner boot

Cut the boot and remove it from the shaft.

NOTE: The inner  constant velocity joint can be cleaned while assembled  and blown clean. For greasing, see Lubricate the constant velocity joint thoroughly . Install the boot on the shaft. Carry out Apply grease in the boot , Vent the boot .