Checking the current value of the yaw-velocity sensor

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on
• Read off the current value of the yaw-velocity sensor.

  The value should be approximately 2.5 V.

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 3: Locating Bracket And Screws

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the value correct? 

• OK 

  OKAY:  Troubleshooting has been completed.

• LOW 

  Refer to Checking the wiring 

• HIGH 

  Refer to Checking the wiring