Checking the connectors

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Check the connectors for the power door mirrors for contact resistance and oxidation according to Contact resistance and oxidation .

  Check for damage carefully.

• Ignition on.

  Other information: 

  • To access the connector for the power door mirror, see Outside temperature sensor door mirror, replacing .
  Fig 3: Identifying 10--Pin Power Door Mirror Connector Terminals

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 4: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the lamp in the power door mirror working? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Checking components and wiring