Checking function

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on.
• Switch on the system using the remote control pointed directly at one of the display screens.

  Check that none of the display screens have been turned off using the remote control.

  Check the function of the system by changing the video source. Ensure that the infra red (IR) receiver on the lower section of the display screen is not blocked.

  Check the batteries in the remote control. Replace them if they are defective.

Can the system be turned on? 

• YES 

  FAULT NOT FOUND:  Troubleshooting has been completed.

• NO 

  Refer to Checking power supply