Installing new hood catch

Fig 1: Identifying Installation Of Bonnet Catch Connector To Existing Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Install the cable on the new hood catch (from the kit)
• Install the bonnet catch. Secure the hood catch with the two screws.

• Connect the bonnet catch connector to the existing connector beside the bonnet catch.

Only applies to left-hand drive cars 

• Reinstall the cable to the bonnet opener control
• Tighten the control using the screw. Reinstall the cover
• Reinstall the carpet.

Applies to all cars 

• Check the function of the bonnet catches.