Checking Components
Check that the following components are intact:
- Rear windshield heating fuse
- Rear windshield heating switch.
Checking the relay
Check that the rear windshield heating relay is correctly installed.
Also check the relay terminal, in particular terminal #5. Check for a short-circuit to ground.
Check the function of the rear windshield heating relay. Activate and deactivate the relay a number of times. The relay is functioning if there is a clicking sound when the relay is activated and deactivated.
Click the VCT2000 symbol to activate and deactivate the relay.
Remedy as necessary.
Other information
Was a fault detected?
- YES
Refer to VERIFICATION
- NO
Refer to CHECKING COMPONENTS AND WIRING