Checking Components And Wiring

Check the signal cable between the central electronic module (CEM) and the rear windshield heating. Check for an open-circuit. Check for a short-circuit to ground.

Take readings between:

• Central electronic module (CEM) terminal hcu (#28) and rear windshield heating connector.

Checking the rear windshield 

Measure the resistance in the heating loop.

Normal resistance at +20°C for:

• 4-doors, approximately 0.63 Ω.
• 5-doors, approximately 0.76 Ω.

Remedy as necessary.

Other information 

• see CONNECTING THE BREAKOUT BOX (2004, 2005, 2006, 2007)
• see SIGNAL DESCRIPTION CENTRAL ELECTRONIC MODULE (CEM) (2004, 2005, 2006, 2007)
• see CONTROL MODULE RELAY BOX PASSENGER COMPARTMENT
• see CHECKING WIRING AND TERMINALS

• Continue 

  Refer to REPLACING REAR WINDSHIELD