LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S40 LSE >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Seat Belt TENSIONER, Passenger Air Bag Rotary Switch, & Seat Occupant Sensor - Removal, Installation, Cleaning, & Inspection) >> Restraints >> Seat Occupant Sensor Cleaning >> Cleaning

Seat Occupant Sensor Cleaning: Cleaning

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2011 Volvo V50, 2010 Volvo V50, 2009 Volvo V50, 2008 Volvo V50, and 2007 Volvo V50. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Wear safety goggles and protective gloves.

Fig 1: Checking Component For Leaks
GLL167234Courtesy of VOLVO CARS CORPORATION
NOTE:

Make sure that the component is clean and free of foreign material.

Use:  H Cleaner, 1161436-9

CAUTION:

Make sure that the area around the component is clean and free of foreign material.

WARNING:

Make sure to remove any spilled silicon(e) immediately.

CAUTION:

Make sure that silicone waste is handled according to local regulations.

Install weight sensor passenger front, see FRONT PASSENGER WEIGHT SENSOR

Calibrate using VIDA (Volvo scan tool)