Occupant Classification Sensor (OCS)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2011 Volvo V50, 2010 Volvo V50, 2009 Volvo V50, 2008 Volvo V50, and 2007 Volvo V50. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

In the event of damage on the front seat cushion upholstery, see:SEAT OCCUPANT SENSOR CHECK and SEAT OCCUPANT SENSOR CLEANING .

CAUTION:

All system components must be replaced when replacing the occupant classification sensor.

Fig 1: Removing Seat Cushion Upholstery (1 Of 2)

Courtesy of VOLVO CARS CORPORATION

Remove the seat cushion upholstery: FRONT SEAT CUSHION .

Fig 2: Removing Seat Cushion Upholstery (2 Of 2)

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Handle the sensor with care.

Fig 3: Identifying Pressure Sensor/Silicon Cushion, Clips And Connectors

Courtesy of VOLVO CARS CORPORATION

To install, reverse the removal procedure

WARNING:

Calibrate the front occupant classification sensor using VIDA (Volvo scan tool).