Install components

Fig 1: Identifying Under-Hood View

Courtesy of VOLVO CARS OF NORTH AMERICA.

Reinstall 

• the front timing belt cover

  Tighten to 12 Nm.  .

• the upper timing belt cover

  Tighten to 8 Nm  .

• the auxiliaries belt
• the servo reservoir

  Wipe clean.

  Check the level and top up if needed.

• expansion tank.
  NOTE: Make sure that the hoses are routed correctly.
• Wipe clean and check the engine compartment.
• the cover in the wing liner
• front wheel.