Installing the intake manifold and gasket

Fig 1: Identifying Intake Manifold And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install 

• a new gasket  . The gasket is held in place by the lower screws for the intake manifold.
• the intake manifold.

  Do not forget the hose for the crankcase ventilation which should be routed up through the gap between the second and third channel

• place the pressure pipe between the first and second channel.
• the three upper screws.

  Tighten all screws starting from the middle.

  with 20 Nm  .