Install the upper cylinder head half

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Press Tool

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the upper half.

Tighten it down against the cylinder head with press tool 9995454 (2 pcs).

Install the upper section from the inside and outside. Tighten to 17 Nm .

Remove the camshaft adjustment tool ( 9995453 ) and tool ( 9995454 )

Fig 1: Identifying Press Tool

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the upper half.

Tighten it down against the cylinder head with press tool 9995454 (2 pcs).

Install the upper section from the inside and outside. Tighten to 17 Nm .

Remove the camshaft adjustment tool ( 9995453 ) and tool ( 9995454 )