Removing engine coolant fan (FC): Remove:

Fig 1: Identifying Engine Coolant Fan (FC) Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Front air intake and inlet hose to the air cleaner (ACL).
• Air duct to the control modules box.
• Engine coolant fan (FC) screws (4).

Lift the upper air guide with the relay out of position.

Remove the two spacer washers located above.

Fig 1: Identifying EVAP Valve Screws And EVAP Hose

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Charge air pipe between the intercooler (CAC) and hose on the throttle body (TB).
• Two screws retaining the EVAP valve.
• EVAP hose from the clips on the FC shroud.