Reinstalling engine coolant fan (FC): Reinstall:

Fig 1: Identifying FC Shroud Cable With Tie Strap And Clip

Courtesy of VOLVO CARS OF NORTH AMERICA.

• FC with shroud on the radiator. Locate the air guide with the relay on the radiator.
• Fasten the cable in the tie strap and the clip on the FC shroud.

Fig 1: Identifying EVAP Valve Screws And EVAP Hose

Courtesy of VOLVO CARS OF NORTH AMERICA.

• EVAP valve on the FC shroud.
• Two clips on EVAP hose on FC shroud.
• Charge air pipe between the intercooler (CAC) and hose on the throttle body (TB).
• Slide the EGR converter into the track in the upper air guide and check that it is securely in place.

Fig 2: Identifying FC Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect FC connectors.

Fig 1: Identifying Engine Coolant Fan (FC) Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Two spacer washers in the tracks
• Engine coolant fan (FC) shroud and upper air guide with four screws.
• Throttle control cable.
• Throttle pulley cover.
• Air duct to the control modules box.
• Air intake and intake hose for air cleaner (ACL).