LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine - Removal, Replacement And Installation (Convertible)) >> Crank Mechanism (M56; 1998-2004) >> Flywheel, replacement >> Installing the gearbox >> Installing and tightening the screws for the gearbox

Installing and tightening the screws for the gearbox

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Gearbox / Engine Screws
GLL109343Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the screws for the gearbox and engine. Tighten the two larger screws. Tighten to 50 Nm  . Tighten the two smaller screws. Tighten to 25 Nm  .

Remove the fixture from the gearbox.

scientia non olet · About LEMON Manuals