Removing the timing gear pulley with the variable valve timing unit

Fig 1: Identifying Camshaft Adjustment Tool 9995452 Installed

Courtesy of VOLVO CARS OF NORTH AMERICA.

Use camshaft adjustment tool: 

• Install camshaft adjustment tool 9995452 at the rear of the camshafts.
• First screw in the part of the tool intended for the exhaust camshaft (drilled hole)
• Then carefully turn the exhaust camshaft clockwise with the camshaft adjustment tool until the intake camshaft tool can be applied (threaded hole)
• Install the intake camshaft adjustment tool.

Fig 2: Identifying Camshaft Adjustment Tool 9995452 Installed

Courtesy of VOLVO CARS OF NORTH AMERICA.

Screw the camshaft adjustment tools together.

Remove: 

• the plug at the front edge of the variable valve timing unit (TORX 55)
• the center screw in the variable valve timing unit (TORX 55). Carefully pull out the timing gear pulley with the variable valve timing (VVT) unit.