Reading off input and output signals
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Using this function, the values and status of the control module input and output signals can be continuously read off.
The following parameters can be read off:
- locking and unlocking signal from the driver's door lock switch
- locking / unlocking signal from the central locking switch
- unlocking signal from tailgate switch, external handle
- unlocking signal trunk lid / tailgate, from inner switch
- fuel tank filler cover opening signal from the internal switch
- signal from the door switch, driver's door
- signal from door switches, other side doors
- signal from the door switch, trunk lid or tailgate
- signal from the hood switch
- tilt sensor, alarm signal
- resistive wire, alarm signal
- airing module, airing signal
- immobilizer, signal if immobilizer is OK
- starter relay.
For further information about parameters, see Parameters .