Manual Control Of The Heater From The Connectors Under The Car
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the connectors to the red and black cables
- Connect the yellow cables to each other (for the blower fan)
- Start the heater manually by connecting the green cables to each other (a manual start must have been performed using the timer)
- Stop the heater by separating the green cables
- To measure the power consumption, separate and remove the gray connector (1) and connect the black ground lead
- Connect an ammeter between the two red cables.
- Continue
Refer to Checking the Combustion Fan, Phase 2