Finishing work after the heater pad has been bonded into place
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- When the heater pad has been bonded into place the positional straps (shaded in the illustration above) must be cut apart. This only applies to those types of heater pads that have positional straps.
-
CAUTION:
The positional straps must not be cut before bonding is complete.