Removing seats: Preparations
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When removing a seat from a car with side airbags, the seat must be grounded. This is due to the danger of static electricity. When the seat has been removed from its screwed joint, but before it is lifted out, secure ground lead 9511522 or splice a suitable length of cable (stripped at both ends) to the rear mounting or similar. The rear mounting is metal colored). Secure the other end in the car to a suitable metal object that has a greater mass than the seat.
Remove:
- the seat belt from the seat rail according to End mounting / Slide rail .