Installing seat: Installing
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order.
NOTE:
First tighten the rear inner screw. Continue with both front screws and tighten the rear outer screw last. Failure to do so may result in the seat being incorrectly installed.
Tighten the nuts retaining the seat and the floor to 40 Nm (29.52 FTP.) .