Replacing backrest upholstery: Installing

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Clips On Outside And Inside Between Upholstery And Filling

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install in reverse order.

Start securing clamps in the middle of the backrest between the upholstery and padding.

Use special pliers P/N 1158962 to secure clamps.

Unsecuring the SIPS airbag

Remove the transport deactivator from the sensor module and replace it inside the control panel.