Supplementary work
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fit the cable harness. Plug in the solenoid connectors.
Fit the oil temperature sensor, securing it with the bolt. Note that the bolt length is in (mm). Tighten to 10 Nm .
Attach the cable harness to the holder. Check that the cable harness is correctly positioned.
Refit as described in Assembling the control system and Fitting the subframe and front suspension components .