Replacing the control system: Preparation

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Remove, see Removing control system cable harness & oil temperature sensor .

Fig 1: Identifying Oil Temperature Sensor And Holder Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

solenoid valve connectors
bolt for oil temperature sensor holder. Detach the sensor from the control system
cable harness from holder on control system.

Bend aside the cable harness.