Fitting the control system
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Make sure that the gear selector lever is in N.
Fit the control system lever to the gear selector lever.
Fit:
- control system bolts
- a new gasket for the control system cover. Note that the bolts are of different lengths (dimensions in mm)
Tighten the bolts alternately until loosely tightened. Then tighten alternately to 10 Nm .