Replacing the sealing ring for the gear shift linkage rod

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Removal Of Sealing Ring Using Small Rounded Off Screwdriver

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the old sealing ring. Use a small rounded off screwdriver.

Take care not to damage the rod.

Smear a little automatic transmission fluid on the new sealing ring. Install the ring. Use drift 9995476 .