LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Transmission - Removal, Replacement And Installation (Coupe)) >> Transmission, Replacement (B5234T3, Aw55-50/51SN; 2001-2002) >> Replacement of control system cable harness with oil temperature sensor >> Fitting the subframe and front suspension components >> Removing lifting yokes and lifting hook

Removing lifting yokes and lifting hook

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Gear-Shift Position Sensor
GLL109388Courtesy of VOLVO CARS OF NORTH AMERICA.

Bend in the lug on the cable harness retainer.

Fit the bolt for the selector lever position sensor/retainer. Tighten it to 25Nm  .

Fit the control shaft lever. Tighten the nut to 16 Nm  .

scientia non olet · About LEMON Manuals