Fitting the front casing and wheels

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fit:

the front casing. Press the front edge into position. Press it forwards. Press the rear edge upwards so that the casing guide enters its groove. Fit the screws.
the wheel. See Tightening the wheel studs .

Lower the car to the floor