LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Transmission - Removal, Replacement And Installation (Coupe)) >> Transmission, Replacement (B5234T3, Aw55-50/51SN; 2001-2002) >> Replacement of control system cable harness with oil temperature sensor >> Fitting the subframe and front suspension components >> Fitting the collision guard over the steering gear (RHD cars only)

Fitting the collision guard over the steering gear (RHD cars only)

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Impact Absorber Bolts
GLL109112Courtesy of VOLVO CARS OF NORTH AMERICA.

Tighten the two bolts to 80 Nm  .

Fit a new collision guard/subframe locknut. Tighten to 50 Nm  .

scientia non olet · About LEMON Manuals