Fitting on RHD cars
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Raise the subframe to about 100 mm from the bodywork.
Fit the steering gear on the RH side and the collision guard in the subframe. Insert the bolts for the anti-roll bar's LH bearing with clamps. Tighten the two clamps to 50 Nm .