Aligning the hose for the charge air pipe. Tightening the clamp (turbocharged engines only)

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Alignment Of Hose For Charge Air Pipe & Tightening Clamp

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the intake manifold outwards as illustrated above. Align the hose with the charge air pipe. Tighten the clamp.

Press the pipe up towards the throttle body (TB) with one hand. Tighten the clamp.

Connect the brake vacuum hose to the intake manifold using the clamp.

Install the hose between the pipe from the charge air cooler (CAC) and the outlet pipe from the turbocharger (TC).