Removing the ball joint

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ball Joint Moved Up And Down By Hand

Courtesy of VOLVO CARS OF NORTH AMERICA.

Move the ball joint up and down by hand (or a jimmy bar can be used) until the ball joint detaches from the stub axle.

Install protective socket 9995562 on the ball joint.

Use holder 9995563 on the control arm when the ball joint is detached.

Disconnect and unhook the links from the anti-roll bar (both sides)