Installation, cont.

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Install:

The bracket for the dipstick pipe. Ensure that the O-ring on the pipe is in position. Tighten with 25 Nm
The lever on the gear shift linkage rod. Tighten to 16 Nm .
Gear cable on the lever with washer and circlip. First apply a little grease 1161241-3 on the lever's spindle.