Removing sensor

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

Clean thoroughly round the sensor.

Remove sensor.

Install new sensor.

Rub some petroleum jelly on the sensor O-ring.

Tighten to:5.5 Nm .