Reinstalling the cables
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Insert the cables between the oil cooler hose and the control system cover.
Install the splashguard under the engine.
Route the cables under the gear selector connector.
Take care not to damage the cables.
Reinstalling other cables
Reconnect the cables to the base.
Pin 12: blue/red cable
Pin 13: blue/black cable
Check that the pins are correctly positioned in the base.