Inspecting/cable harness to solenoids: Preparations: Install:

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transmission Cable, Gear Position Sensor Screw & Retainer For Harness Gland

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

Retainer to cable harness grommet
Gear position sensor bracket screw
Lever. Tighten to:16 Nm (11.8 lb.ft).
Gear selector cable with washer and retaining clip Apply a little grease 1161241-3 to lever pin.