Removing the sub-frame

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Mobile Jack

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the sub-frame from the car.

Position the mobile jack 9995972 under the left-hand side of the sub-frame and raise it into light contact with the frame.

Unscrew the two screws between the frame and body (right side) 10-15 mm . Remove the screws on the left-hand side.

NOTE:

All-wheel drive (AWD) = maximum 5 turns.