Installing the steering gear collision protection

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Impact Absorber Bolts

Courtesy of VOLVO CARS OF NORTH AMERICA.

Right-hand drive models only:

Install the collision protection over the steering gear.

(2 screws) Tighten to: 80 Nm .