Installing the brake pipe bracket
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install:
Fig 1: Identifying Bracket For Brake Pipe/ABS Cable, Link From Anti-Roll Bar And Control Arm/Ball Joint From Wheel Spindle
- Control arm/ball joint to wheel spindle. Remove the sleeve 9995562 from the ball joint. Use new nuts for the screws. Tighten to 40 Nm .
- The linkage to the anti-roll bar. Use new nuts. Torque: 50 Nm .
- The brake pipe bracket.