Installing the gearshift lever components
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Carefully fit the cable on the lever spindle and on the stud bolts.
Make sure the position of the gear shift lever and the lever do not change.
Fit washers (only early design) and nuts.
Tighten the nuts by hand and crosswise. Now tighten with torque 25 Nm .
Fit the washer and circlip on the lever.