Installing the throttle cable

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Throttle Cable On Pedal And Rubber Buffer On Accelerator Pedal Lug

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the throttle cable on the pedal.

Make sure that the rubber buffer is positioned on the accelerator pedal lug.

Hook the cable with the holder on the accelerator pedal. Make sure the ball bottoms in the holder.

On cars with SRS:

Install the knee protection. Tighten to 20 Nm .

Install the soundproofing panel.