Lowering the sub-frame

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Sub-Frame Bolts And Special Tool Set 999 5972 / 998 5972

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

For cars with fuel powered parking heaters: mark up the position of the mounting in relation to the sub-frame.

Position the mobile jack lightly applied under the left side of the sub-frame. Remove the sub-frame screws.

NOTE:

Ensure the following when lowering the sub-frame:

that the steering gear screws release from the sub-frame
that the brake pipe does not catch in the bracket for the exhaust pipe mounting
that the ball joint pinion releases from the control arm.

Remove the mobile jack and let the frame hang loose.