Installing the lifting beam and lifting hook on the engine lifting lug

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Special Tools Installed (Lifting Beam And Lifting Hook)

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

The front lifting beam must be equipped with fixture kit 9997070 as shown in the illustration.

Position lifting beam 9995716 on the wheel arch and directly above the engine lifting lug on the left and right-hand sides.

Connect lifting hook 9995460 on the engine lifting lugs. On the right-hand side of the engine, the hook must have a clearance of 10 mm .

Tighten to light contact on the left hand side.

Raise the car.