Installing the lower oil pipe on the transmission

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Oil Pipe/Dip Stick Pipe Screws And Ground Lead

Courtesy of VOLVO CARS OF NORTH AMERICA.

Use a new O-ring.

Install:

the oil pipe. Tighten the lower M6 screw. See Summary of tightening torques for specific components
the upper M8 screw (oil pipe/dip stick pipe). See Summary of tightening torques for specific components
a tie strap for the cable harness for the oil pipe
the ground lead to the engine.